AudioCodes Mediant 2000, User Manual

Page: 248 / 418

SIP User's Manual 248 Document #: LTRT-68808
Mediant 2000
¾
To view detailed channel information of a trunk's channel, take
these 2 steps:
1.
Click a required channel pertaining to a trunk for which you want to view information;
the 'Basic Channel Information' page appears, displaying basic information about the
channel:
Figure 3-117: Basic Channel Information Page
2.
To view additional channel information, click the buttons (
SIP
,
Basic
,
RTP/RTCP
, and
Voice Settings
) located above on the page.
3.6.2 Gateway Statistics
The 'Gateway Statistics' page allows you to monitor real-time activity such as IP
connectivity information, call details and call statistics, including the number of call
attempts, failed calls, fax calls, etc. This menu includes the following page items:
„ IP to Tel Calls Count and Tel to IP Calls Count (refer to ''Call Counters'' on page 248 )
„ Call Routing Status (refer to ''Call Routing Status'' on page 250 )
„ SAS/SBC Registered Users (refer to “SAS/SBC Registered Users” on page 251 )
„ IP Connectivity (refer to ''IP Connectivity'' on page 252 )
Note:
The 'Gateway Statistics' pages don't refresh automatically. To view updated
information, re-access the required page.
3.6.2.1 Call Counters
The 'IP to Tel Calls Count' and 'Tel to IP Calls Count' pages provide you with statistical
information on incoming (IP-to-Tel) and outgoing (Tel-to-IP) calls. The statistical information
is updated according to the release reason that is received after a call is terminated (during
the same time as the end-of-call Call Detail Record or CDR message is sent). The release
reason can be viewed in the 'Termination Reason' field in the CDR message.
You can reset the statistical data displayed on the page (i.e., refresh the display), by
clicking the
Reset Counters
button located on the page.