manualshive.com logo in svg

AudioCodes Mediant 2000, User Manual

The AudioCodes Mediant 2000 is a versatile communication device, designed to enhance your business phone systems. With its comprehensive User Manual, easily downloadable for free at our manualshive.com, you can effortlessly navigate through its features, configurations, and troubleshooting information. Perfect for optimizing your communication network and boosting productivity.

Share
Download
background image

SIP User's Manual 

246 

Document #: LTRT-68808 

 Mediant 

2000 

 

3.6.1.6  Viewing Active Alarms 

The 'Active Alarms' page displays a list of currently active alarms. For each alarm, the 
following information is provided: 

„

 

Severity: 

severity level of the alarm: 

•

 

Critical - alarm displayed in red 

•

 

Major - alarm displayed in orange 

•

 

Minor - alarm displayed in yellow 

„

 

Source:

 unit from which the alarm was raised 

„

 

Description:

 brief explanation of the alarm 

„

 

Date:

 date and time that the alarm was generated 

You can also access this page from the 'Home' page (refer to ''Using the Home Page'' on 
page 

46

). 

¾

 

To view the list of alarms, take this step: 

„

 

Open the 'Active Alarms’ page (

Status & Diagnostics 

tab > 

Status & Diagnostics

 

menu > 

Active Alarms 

page item)

.

 

Figure 

 

3-114: Active Alarms

 

Page 

 

 

3.6.1.7  Viewing Trunks & Channels Status 

The 'Trunks & Channels Status' page displays the status of the device's Trunks and the 
channels pertaining to these trunks. 

¾

 

To view the status of the device's trunks and the trunks' channels, 
take the following step: 

„

 

Open the 'Trunks & Channels Status' page (

Status & Diagnostics 

tab > 

Status & 

Diagnostics

 menu >  

Trunks & Channels Status 

page item). 

Figure 

 

3-115: Trunks & Channels Status

 

Page 

 

Summary of Contents for Mediant 2000



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Mediant 2000

THOMSON TG605s Cli Reference Manual preview
TG605s
Brand: THOMSON Pages: 974
H3C MSR3610-I-DP Installation Manual preview
MSR3610-I-DP
Brand: H3C Pages: 39
David Clark U9922-G38 User Manual preview
U9922-G38
Brand: David Clark Pages: 11
RTA 460ESUS-NNA1 Product User Manual preview
460ESUS-NNA1
Brand: RTA Pages: 78
MOKO MKGW2-LW Configuration Manual preview
MKGW2-LW
Brand: MOKO Pages: 34
Efento Gateway User Manual preview
Gateway
Brand: Efento Pages: 14
TRI02SYS EnOcean 02LINE Installation And Operating Manual preview
EnOcean 02LINE
Brand: TRI02SYS Pages: 4
Vantron C335 S User Manual preview
C335 S
Brand: Vantron Pages: 98
JVL FBG10 User Manual preview
FBG10
Brand: JVL Pages: 47
Owon ZigBee SEG-X1 Quick Start Manual preview
ZigBee SEG-X1
Brand: Owon Pages: 8
ZyXEL Communications AMG1202-T series User Manual preview
AMG1202-T series
Brand: ZyXEL Communications Pages: 320
UTC Fire and Security T-500W Manual preview
T-500W
Brand: UTC Fire and Security Pages: 4
Grace Digital Cell2Tel C2T-XT2000 Specification preview
Cell2Tel C2T-XT2000
Brand: Grace Digital Pages: 1
Raisecom iTN201 Hardware Description preview
iTN201
Brand: Raisecom Pages: 30
virtual access GW8600 Service Managed Gateway Installing And Configuring preview
GW8600 Service Managed Gateway
Brand: virtual access Pages: 12
virtual access GW-4000 Series User Manual preview
GW-4000 Series
Brand: virtual access Pages: 14
hager TYC701E Manual preview
TYC701E
Brand: hager Pages: 2
Pakedge Device & Software RSB-KIT Installation Manual preview
RSB-KIT
Brand: Pakedge Device & Software Pages: 52

Brands by name

Popular brands

Load more brands