AudioCodes Mediant 2000, User Manual

Page: 102 / 418

SIP User's Manual 102 Document #: LTRT-68808
Mediant 2000
3.4.6.2 Configuring the Web and Telnet Access List
The 'Web & Telnet Access List' page is used to define up to ten IP addresses that are
permitted to access the device's Web and Telnet interfaces. Access from an undefined IP
address is denied. If no IP addresses are defined, this security feature is inactive and the
device can be accessed from any IP address.
The Web and Telnet Access List can also be defined using the
ini
file parameter
WebAccessList_x (refer to ''Web and Telnet Parameters'' on page 273 ).
¾
To add authorized IP addresses for Web and Telnet interfaces
access, take these 4 steps:
1.
Open the 'Web & Telnet Access List' page (
Configuration
tab >
Security Settings
menu >
Web & Telnet Access List
page item).
Figure 3-51: Web & Telnet Access List Page - Add New Entry
2.
To add an authorized IP address, in the 'Add a New Authorized IP Address' field, enter
the required IP address, and then click
Add New Address
; the IP address you
entered is added as a new entry to the 'Web & Telnet Access List' table.
Figure 3-52: Web & Telnet Access List Table
3.
To delete authorized IP addresses, select the Delete Row check boxes corresponding
to the IP addresses that you want to delete, and then click
Delete Selected
Addresses
; the IP addresses are removed from the table and these IP addresses can
no longer access the Web and Telnet interfaces.
4.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 230 .