AudioCodes Mediant 2000, User Manual

Page: 273 / 418

Version 5.6 273 November 2008
SIP User's Manual 4. ini File Configuration
Parameter Description
ExtBootPReqEnable
ƒ
[0]
= Disable (default).
ƒ
[1]
= Enable extended information to be sent in BootP request.
If enabled, the device uses the vendor specific information field in the
BootP request to provide device-related initial startup information such
as blade type, current IP address, software version, etc. For a full list
of the vendor specific Information fields, refer to the
Product
Reference Manual
.
The BootP/TFTP configuration utility displays this information in the
'Client Info' column (refer to the
Product Reference Manual
).
Note:
This option is not available on DHCP servers.
Serial Parameters
DisableRS232
Enables or disables the device's RS-232 port.
ƒ
[0]
= RS-232 serial port is enabled (default).
ƒ
[1]
= RS-232 serial port is disabled.
The RS-232 serial port can be used to change the networking
parameters and view error / notification messages. For information on
establishing a serial communications link with the device, refer to the
device's
Installation Manual
.
SerialBaudRate
Determines the value of the RS-232 baud rate.
The valid range is any value. It is recommended to use the following
standard values: 1200, 2400, 9600 (default), 14400, 19200, 38400,
57600, 115200.
SerialData
Determines the value of the RS-232 data bit.
ƒ
[7]
= 7-bit.
ƒ
[8]
= 8-bit (default).
SerialParity
Determines the value of the RS-232 polarity.
ƒ
[0]
= None (default).
ƒ
[1]
= Odd.
ƒ
[2]
= Even.
SerialStop
Determines the value of the RS-232 stop bit.
ƒ
[1]
= 1-bit (default).
ƒ
[2]
= 2-bit.
SerialFlowControl
Determines the value of the RS-232 flow control.
ƒ
[0]
= None (default).
ƒ
[1]
= Hardware.