AudioCodes Mediant 1000B SBA, Installation And Maintenance Manual

Page: 67 / 298

Installation & Maintenance Manual 9. Defining the Branch Office Topology using Topology Builder
Version 6.8 67 Microsoft Lync Server
9.2 Publishing the Topology
Once you have defined the Branch Office (as described in the previous section), you need
to publish this new topology, as described below.

To publish the topology:
1. Right-click the root of the Lync Server 2013 node, and then choose Publish
Topology .
Figure 9-15: Publish Topology Selection
The following screen appears:
Figure 9-16: Publish the Topology