AudioCodes Media Pack MP-11x, User Manual

Page: 621 / 650

Version 6.6 621 MP-11x & MP-124
User's Manual 44. Configuration Parameters Reference
44.11.10 Hunt Groups and Routing Parameters
The routing parameters are described in the table below.
Table 44-59: Routing Parameters
Parameter Description
Endpoint Phone Number Table
Web: Endpoint Phone Number Table
EMS: SIP Endpoints > Phones
[TrunkGroup]
This table parameter configures and activates the device's
endpoints. This is done by defining telephone numbers and
assigning them to Hunt Groups. The format of this
parameter is shown below:
[TrunkGroup]
FORMAT TrunkGroup_Index =
TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId,
TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel,
TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId,
TrunkGroup_LastTrunkId, TrunkGroup_Module;
[\TrunkGroup ]
For example:
The configuration below assigns channels 1 through 4 to
Hunt Group 1 and assigns phone numbers 101 to Channel
1, 102 to Channel 2, and so on:
TrunkGroup 0 = 1, 255, 1, 4, 101, 0, 255, 255;
Note: For a description of this table, see Configuring
Endpoint Phone Numbers on page 235 .
Hunt Group Settings
Web: Hunt Group Settings
EMS: SIP Routing > Hunt Group
[TrunkGroupSettings]
This table parameter configures the rules for channel
allocation per Hunt Group. The format of this parameter is as
follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,
TrunkGroupSettings_ContactUser,
TrunkGroupSettings_ServingIPGroup,
TrunkGroupSettings_MWIInterrogationType,
TrunkGroupSettings_TrunkGroupName;
[\TrunkGroupSettings]
For example:
TrunkGroupSettings 0 = 1, 0, 5, branch-hq, user, 1, 255, ;
TrunkGroupSettings 1 = 2, 1, 0, localname, user1, 2, 255, ;
Note: For a description of this table, see 'Configuring Hunt
Group Settings' on page 237 .