AudioCodes Media Pack MP-11x, User Manual

Page: 237 / 650

Version 6.6 237 MP-11x & MP-124
User's Manual 21. Hunt Group
21.2 Configuring Hunt Group Settings
The Hunt Group Settings allows you to configure the following per Hunt Group:

Channel select method by which IP-to-Tel calls are assigned to the Hunt Group's
channels.

Registration method for registering Hunt Groups to selected Serving IP Group IDs.
Notes:
•
For configuring Hunt Groups, see Configuring Endpoint Phone Numbers on page
235 .
•
The Hunt Group Settings table can also be configured using the table ini file
parameter, TrunkGroupSettings
(see 'Number Manipulation Parameters' on page
630 ).

To configure the Hunt Group Settings table:
1. Open the Hunt Group Settings page ( Configuration tab > VoIP menu > GW and IP
to IP submenu > Hunt Group > Hunt Group Settings ).
Figure 21-2: Hunt Group Settings Page
2. From the 'Index' drop-down list, select the range of entries that you want to edit.
3. Configure the Hunt Group as required. For a description of the parameters, see the
table below.
4. Click Submit to apply your changes.
5. To save the changes to flash memory, see 'Saving Configuration' on page 366 .
Table 21-2: Hunt Group Settings Parameters Description
Parameter Description
Hunt Group ID
[TrunkGroupSettings_TrunkGro
upId]
Defines the Hunt Group ID that you want to configure.