AudioCodes Media Pack MP-11x, User Manual

Page: 497 / 650

Version 6.6 497 MP-11x & MP-124
User's Manual 44. Configuration Parameters Reference
Parameter Description

[1] Enable
44.3.2 SIP Test Call Parameters
The SIP Signaling Test Call parameters are described in the table below.
Table 44-17: SIP Test Call Parameters
Parameter Description
Web: Test Call DTMF
String
[TestCallDtmfString]
Defines the DTMF tone that is played for answered test calls (incoming
and outgoing).
The DTMF string can be up to 15 strings. The default is "3212333". An
empty string means that no DTMF is played.
Web: Test Call ID
[TestCallID]
Defines the test call prefix number ( ID ) of the simulated phone on the
device. Incoming calls received with this called prefix number are
identified as test calls.
This can be any string of up to 15 characters. By default, no number is
defined.
Note: This parameter is only for testing incoming calls destined to this
prefix number.
Test Call Table
Web: Test Call Table
[Test_Call]
Defines the local and remote endpoints to be tested.
FORMAT Test_Call_Index = Test_Call_EndpointURI,
Test_Call_CalledURI, Test_Call_RouteBy, Test_Call_IPGroupID,
Test_Call_DestAddress, Test_Call_DestTransportType, Test_Call_SRD,
Test_Call_ApplicationType, Test_Call_AutoRegister,
Test_Call_UserName, Test_Call_Password, Test_Call_CallParty,
Test_Call_MaxChannels, Test_Call_CallDuration,
Test_Call_CallsPerSecond, Test_Call_TestMode,
Test_Call_TestDuration, Test_Call_Play, Test_Call_ScheduleInterval;
Note: For a description of this table, see 'Configuring Test Calls' on
page 461 .