AudioCodes Media Pack MP-11x, User Manual

Page: 131 / 650

Version 6.6 131 MP-11x & MP-124
User's Manual 12. Network

At least two interfaces share the same address space or subnet.
Apart from these validation errors, connectivity problems may be caused by one of the
following:

Trying to access the device with VLAN tags while booting from BootP/DHCP.

Trying to access the device with untagged traffic when VLANs are on and Native
VLAN is not configured properly.

The IP Routing table is not configured properly.
12.2.4 Networking Configuration Examples
This section provides configuration examples of networking interfaces.
12.2.4.1 One VoIP Interface for All Applications
This example describes the configuration of a single VoIP interface for all applications:
1. Multiple Interface table: Configured with a single interface for OAMP, Media and
Control:
Table 12-2: Example of Single VoIP Interface in Multiple Interface Table
Index
Application
Type
IP Address
Prefix
Length
Default
VLAN
ID
Interface
Name
0 OAMP, Media &
Control
192.168.85.14 16 192.168.0.1 1 myInterface
2. VLANS are not required and the Native VLAN ID is irrelevant. Class of Service
parameters may have default values.
3. IP Routing table: Two routes are configured for directing traffic for subnet
201.201.0.0/16 to 192.168.0.2, and all traffic for subnet 202.202.0.0/16 to 192.168.0.3:
Table 12-3: Example of IP Routing Table
Destination IP
Address
Prefix Length Gateway IP Address Metric
201.201.0.0 16 192.168.0.2 1
202.202.0.0 16 192.168.0.3 1
4. The NTP applications remain with their default application types.