400HD Series IP Phones
Administrator's Manual
68
Document #: LTRT-11973
5.1.3 Configuring a Line
The network administrator can configure a line.
To configure line mode:
•
Use the table as reference.
Table 5-7: Line Settings
Parameter
Description
voip/line/0-5/description
Defines the SIP User ID which is sent in “INVITE” packets to
the called party in the “From” field, and should appear to the
called party as “Caller ID”. Default: 400HD
voip/line/0-5/enabled
Activates or deactivates the line.
0
= Disabled (this is the default for the second line and higher
in the configuration file)
1
= Enabled
(this is the default for the first line
voip/line/0/
in
the configuration file).
voip/line/0-5/id
Defines the SIP User ID provided by the SIP server which the
phone attempts to associate itself with during the registration
process. This is also the default ID sent in the “INVITE” if the
Line Display Name above is left blank.
Default: 0
voip/line/0-5/auth_name
Defines the SIP username credential used in the registration
process when attempting to associate with the above Line ID.
Default: 0
voip/line/0-5/auth_password
Defines the SIP password associated with the above Line ID
identifier during the registration process.
Default: 0
voip/line/0-5/line_mode
Applies only to the 430HD and 440HD phones.
Determines the line mode: PRIVATE (default) or SHARED.
PRIVATE line - only presented with private call appearances.
SHARED line – lets users share an extension number and
manage a call as a group. When an employee places a call on
a SHARED line on hold, the call can be resumed from any
other employee sharing the line. A SHARED line is a line that
is only presented with shared call appearances. Icons
displayed in the phone's screen indicate if lines are configured
in a Shared Call Appearance group, or as private lines.
A hollow icon indicates a phone configured in an SCA
group.
A solid icon indicates a phone configured as private.
voip/line/0-5/extension_display
Supported only on the 430HD/440HD phones. Defines the
label displayed in the phone screen. To meet requirements for
users with the 405HD phone, use the parameter
‘voip/line/0/description’ (see
for more information).
Summary of Contents for 405HD
Page 2: ......
