Audiocenter Artist T88 User Manual Download Page 4

2

 

Wall controller

Introduction

Congratulations on your ownership of a new Artist Audio Matrix , and thank you for your confidence in AUDIOCENTER products. 
You are among the growing number of audio professionals who have made AUDIOCENTER one of the world’s leading suppliers 
of professional and commercial/industrial audio systems.

For your safety, please read the Important Precautions section before installing and operating the Audio Matrix, and please take 
some time to read this manual so that you can make full use of the Audio Matrix.

In order to maintain strict quality assurance standards, all Artist Audio Matrix  are built in AUDIOCENTER’s state-of-the-art 
manufacturing faculty. Internal components are the finest available,and key sub assemblies are pre-tested before final assembly. 
Finally, each power Audio Matrix is “burned in” and thoroughly tested (using audio precision test equipment) before shipping. You 
can depend on consistent and stable performance even when your Artist Audio Matrix  is subject to punishing extremes in the 
most demanding fixed or mobile sound reinforcement applications.

Work Seamlessly with Artist speakers and power amplifiers, providing a variety of classical 
speaker presets to quickly establish a complete sound system

All functions can be configured through Windows system, supporting networking, joint debugging
 and remote control of multiple devices

24 bit AD/DA conversion, 96KHz sampling rate, 10Hz ~ 28KHz bandwidth, over
116dB dynamic range

Built-in camera tracking function to control the camera by sound

GPIO 

programmable connector

Unpacking

Please inspect the audio matrix carefully immediately after unpacking. If you find any damage, notify your supplier /dealer 
immediately. Only the shipper may file a damage claim with the carrier for damage incurred during shipping. Be sure to save 
the carton and all packing materials for the carrier’s inspection. If you ever need to ship the unit back to AUDIOCENTER or an 
authorized service center, you should use only the original manufacturer’s packaging.

Installation

Artist T88D/T88 is one-rack-space high. Four front-panel mounting holes are provided on each audio matrix. All mount in standard 
19-inch racks.

Wall

controller

Mobile 
 phone

The tablet

Laptop computer

Audio Matrix 

Artist T88D/T88 is a powerful8-in-8-out audio matrix that supports 8 analog audio inputs and 8 analog audio output. Artist T88D 
also supports 4 * 4 Dante network audio input and output. Diverse I/O options provide you with the flexibility required to integrate 
into the system. It can meet the control and audio processing for various places.

8 analog audio inputs, 8 analog audio outputs, Artist T88D supports 4 * 4 Dante network 
audio input and output

With both microphone input and line input, with 48V phantom power

In built with functions of AFC, auto mixing, matrix mixing, equalizer, crossover, limiter by 
DSP to deliver clear sound dynamic

USB drive-free automatic connection software, open RS-232, RS-485 protocol to achieve 
third-party control, support TCP/IP remote control

Through the computer software BrainCore Net of the Windows system, all devices in the local area can be controlled remotely, 
and all the parameters of the Audio Matrix can be effectively controlled. Through the joint debugging function, multiple devices of 
the same model can be debugged. Part of the function control can also be achieved through the wall controller and the mobile 
APP (Android). With the scene preset function, users can directly use the wall controller or intelligent central control to achieve 
scene calling, volume adjustment and other functions.

Summary of Contents for Artist T88









































Reviews: