Controls & Functions
9
REMOTE BASS BOOST KNOB
Mounting and Installation
1. Using the screws provided with the kit, find a location under the dash, center console,
or a place that gives easy access to the remote bass boost knob.
2. Plug in the supplied cord into the back of the bass boost knob.
Adjusting the Level
To adjust the level setting, first turn the amplifier gain all the way down. Then turn the
source volume up until distortion is audible, and then turn it down until distortion is inau-
dible. Next, turn the amplifier level setting until once again distortion is audible, and then
back it down until distortion is inaudible.
Adjusting the PHASE
If the enclosures woofers are facing towards the trunk lid the phase switch should be set to
180º, if the enclosures woofers are facing towards the front of the vehicle the phase switch
should be set to 0º.
10. Remote Bass Knob Port
REMOTE
Bass Boost Control (MIN / MAX) :
Optional
9. Phase Shift control
