Installation and Setup
7
Setting Equalizer Controls
1. 1. Begin by setting all frequencies to the center or level position.
2. 2. Play a favorite music track that you know well and adjust the individual EQ controls
as desired. Avoid extreme settings that can distort musical peaks.
3. 3. Increase or decrease the EQ gain controls as necessary.
4. 4. If your system includes a subwoofer, slowly increase the subwoofer control until you
hear solid bass.
5. 5. If your system includes rear speakers, adjust the fader control to add rear sound. Set
it so most of the music comes from the front and only fills in the rear.
Setting the Low-Pass Frequency
The in-dash EQ processors have a built in low-pass crossover located on the front of the
unit. Set the crossover (60Hz - 90Hz) upon the type and size of your subwoofer system.
1. 1. Plug the additional video source into the DVD input located on the back of the unit.
2. 2. With the Main/DVD switch in the MAIN position, turn the equalizer volume to a nor-
mal
listening volume.
3. 3. With the video source in play mode, switch to the DVD input source.
4. 4. With the Main/DVD switch in the DVD position, adjust the input gain controls located
on the top of the panel so that the volume of the DVD source matches the volume of
the Main source.
