TERMINALS
5
The box can be wired in 1) a stereo configuration (each sub wired to a different channel)
or 2) a mono configuration (both subs wired together to a single channel of an amp, or two
bridged channels of an amp). Looking at the back of the box you will see each side’s termi-
nals. The left terminal is negative (-) and the right side is positive (+) for each set.
Your bandpass box also comes with another terminal that looks like the one pictured
above. You need to hook this up to a 12 volt power source and a ground. The power (+) is
on the right side and the ground (-) on the left side. You may want to wire this up to a switch
so you can turn the LED light on and off. You can wire it up to the remote wire so the neon
light turns on when you turn your stereo on.
For LED (Light)
