The Bass Boost Remote unit has a built-in clipping indicator. Clipping means
that the amplifier is sending out a square wave. This type of output is all
distortion that can and will damage you amplifier and/or speakers wired to
the amplifier. This type of damage is not considered a manufacturer defect
and so is not covered under warranty. Causes of clipping could be setting the
gain and/or bass boost too high, low voltage from the electrical system,
problems with the source unit outputs among other things. You nee dto make
sure to remedy the problem if it accurs. The plastic circle around the adjust-
able remote knob will light up blue during normal operation. When the
amplifier starts to clip the signal output the color will change to red.
CLIPPING INDICATOR
