background image

16. LED indicator (Status) 

POWER 

PROTECT 

-PWR (Power) : This BLUE LED will illuminate when the amplifier is turned "ON". If it fails to illuminate, check the power  

          connections to the amplifier and fuses. 

- PROT (Protection) : The amplifier protection circuitry will disable the amplifier if input overload, short circuit, or extremely  

             high temperature conditions are detected. When the protection mode is in operation, the LED indicator on the side 

            panel will be illuminated, indicating the amplifier has gone into a self-preservation mode. 

    If you observe that the protection LED is lit, please check the system carefully to determine what has caused the  

protection circuit to engage.  The amplifier shut down due to a thermal overload condition, please allow it to cool 

down before restarting. If the amplifier shut down because of an input overload or short circuit, be sure to repair these 

conditions before attempting to power up the amplifier again. 

Fig 1. 

LI N E  C O D E 

Fig 2. 

LI N E  C O D E 

M I N 

M A X 

Optional Remote Bass Boost Control 

Optional Remote Digital Volt Meter

CONTROLS & FUNCTIONS

16

Summary of Contents for A16000J

































Reviews: