AudioBahn A12001DJ, Owner'S Manual

Page: 10 / 24

These terminals are used to wire your subwoofer(s) to the amplifier.
To avoid unwanted ignition noise caused by ground loops, it is essential that the amplifier be grounded to
a clean, bare, metal of the vehicle's chassis. This metal surface should be solid, strong and connected
directly to the frame of the car.
Note: GROUND WIRE SHOULD NOT BE EXTENDED MORE THAN 3 FEET (1 METER)
Due to the power requirements of the amplifier, this connection should be made directly to the positive (+)
terminal of the battery. For safety purposes, install an in-line fuse holder (not included) as close to the
battery positive (+) terminal as possible with an ampere rating not to exceed the total value of fuses in the
amplifier.
11. Speaker Terminals
12. B- Terminal (Chassis Ground)
13. B+ Terminal (Battery Positive)
CONTROLS & FUNCTIONS
9