V1.4
Region
Enter the Region menu to select TV regions to ensure the correct
selection for operation in your current region. In the region menu there
are 3 regions:
USA – 6MHz TV channels
EU – 8MHz TV channels
AU/NZ – 7 MHz TV channels
Update
firmware
Selecting the Update allows the user to update the firmware of the
transmitter using the micro SD card. Copy the firmware update file onto
a suitable micro SD card and insert it into the micro SD card slot in the
battery compartment of the transmitter. To prevent accidental
updating of the transmitter the user will be requested to confirm
whether to update the firmware.
Blue LED
Selecting the Blue LED menu allows the user to turn the blue LED on or
off if required. Confirm whether the blue LED is required to be switched
off. This selection is stored in memory so that the state if preserved
even if the batteries are changed.
Bluetooth
Menu
The Bluetooth menu can be accessed, allowing the user to turn the
Bluetooth on/off. It also allows the user to ‘forget the pairing’ of the
TX1010 with the iOS TxApp.
Restore
The restore function allows the user to reset the TX1010 to the factory
default settings.
Note: After a ‘Restore’ to factory settings the region will reset to E-
Europe so please select the current region in your locality before
proceeding further.
Battery type
The end user can set the battery type being used to ensure the accuracy
of the battery level indicator on the TX1010 and also on the TX battery
indicator in the receiver. The battery discharge curve algorithms for 3
different battery types are currently selectable. NiMH, Lithium and
Alkaline.
