Cruise Control
Activate
To activate, pull the control stalk toward you to the ON position.
Set Cruising Speed
At your desired speed, press the SET button at the end of the stalk.
The set speed and the CRUISE indicator light are shown in the Audi
virtual cockpit.
Changing Speed
There are several ways to change your speed:
•
Accelerate or decelerate, then press the SET button again.
•
Push the stalk up or down one detent to increase/decrease speed in 1 mph increments.
•
Hold the stalk up or down to increase/decrease speed; release when desired speed is reached.
Cancel/Resume
1.
To cancel, press the brake pedal or push the stalk slightly away from you to the CANCEL position.
2.
The CRUISE light will go off.
3.
To resume, pull the stalk toward you and you will return to your last set speed.
Your most recently set speed remains in memory until you turn the cruise control or your Audi off.
Audi Side Assist
Side assist can help monitor your blind spot and the traffic behind
your vehicle. Within the limits of the system and when activated, it
can warn you about vehicles that are coming closer or those that are
near you within sensor range. If a lane change is classified as critical,
the display in the exterior mirror will turn on.
Turning the system on or off and adjusting the brightness can be
found in the Infotainment system. To adjust or turn on/off, press the
MENU button select
Vehicle
Left Control button
Driver
assistance Audi side assist
.
Driver Assistance Features
Warnings: Driver Assistance
See Cruise Control System and Driver Assistance in your Owner’s Manual for more detailed information and for important safety warnings.
