Optional Spacer mounting
Spacer is used when the back of TV is
not flat or the mount holes are sunk into
the back of the TV. (Rarely used)
M8 X 40
M6 X 40
Spacer
TV Bracket
Multi
M8 x 20
Multi
Washer
M6 x 25
OR
M5 x 25
Page 5
of 6
AUDIO
VIDEO FURNITURE INTERNATIONAL
288
Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
TV
Hardware Bag
Attaching TV Brackets
1. Place TV face down on blanket or non abrasive surface such as cardboard.
2. Check to see if your TV came with mounting hardware or not.
If not,we have supplied the most common hardware.
Most displays under 42" will use the M6 bolt. Most 42"+ will use the M8 bolts.
See which bolt length you need by hand tightening only.
3. Place TV brackets so you can see the TV mounting holes through the bracket
and insert bolt through a multi washer.
4. Hand tighten until there is resistance, then give a half turn with hex key.
DO NOT OVER TIGHTEN AS THIS CAN DAMAGE OR PUNCTURE THE TV
Notes
.
Have 2 people lift the TV as it can be very heavy and awkward.
•
Some TV's require non standard hardware. This bracket was made to
•
accommodate up to M10 bolts which can be found at your local hardware
store along with longer versions of the included hardware.
Summary of Contents for T526
Page 4: ...x20 16 6 5 6 Page 4 of 6 ...
