CONDUCTOR
reference pre amplifier_
Input terminal setup menu (configuration)
All inputs are configurated as XLR or RCA inputs for the use of
balanced or single ended signal phases.
To set up your chosen inpust please TURN OFF the power supply by the main switch.
Then you press the both little switches ( left and right from the display ) in an upper
position. The same time you switch on the power supply with the main switch.
Screen
desrcibtion
1 CLOCK SYMBOL
Fig.1 shows 4 buttons in the lower screen which offer
you different options, he actual chosen by a square red
flashing cursor. Now it shows the actual running hours
of your amp .
2 TOOL SYMBOL
Push the left switch up or down to select the input,
then use the right switch to toogle between XLR or
Cinch mode.
Push the bottom switch to the right side to make fix
and leave your input settlings [ right button ].
3 EXIT SYMBOL
Push the right switch to save the new input
configuration and leave the setup menue.
The information symbol is just for the manifactures
interests.