Assistent 50
integrated tube amplifier_____________________
INPUT TERMINALS
The 5 RCA INPUTs
are standard RCA terminals for the
use of unbalanced input signals coming from most signal sources .
SPEAKER TERMINALS
Speaker terminals - 8 Ohm - are located on the left rear panal, close to the input
sources.
Two pairs of heavy duty gold plated binding posts for each cannel are supplied.
CONNECT
your loudspeaker positive terminal to the
amplifier (+)
output terminal. Connect your loudspeaker
negative terminal to the ( - ) output terminal.
POLARITY - PHASING
Quality of the connections must be examined to ensure a high
performance trouble free operation is enjoyed. Check that the connections are
tight, but do not overtighten with exessive use of spanners etc. If bare wires are
used, make sure that no loose strands of wire short across to the other
terminals or the amplifier chassis. When using plugs such as Banana, be sure to
use good quality one`s with a firm fit.
Please remember that the AUDIOVALVE
Assistent 50
amplifier is a high quality electronic instrument
capable of an exeptional level of performence.
