9
From the menu screen, use UP/DOWN to
select "FREQUENCY," and then press SET.
From the menu screen, use UP/DOWN to
select "NAME," and then press SET.
A line is displayed under the first three
digits.
Use UP/DOWN to select characters.
When the desired character is displayed,
press SET. This confirms the selection
and moves the cursor to the right.
Use UP/DOWN to select the frequency.
Repeat the operation until all characters
are entered.
An entry of 10 characters is required.
If less than 10 characters is desired, set
the entry for SPACE and press SET until
the cursor moves to the 10th character
position.
Use UP/DOWN to select the frequency.
Press SET.
A line is displayed under the last three digits.
At the 10th character position, press SET.
Once pressed, "STORED" is displayed and
NAME setting is complete.
Press SET.
"STORED" is displayed, and the
transmission frequency setting is complete.
The maximum number of characters that can be entered is 10.
The following types of characters can be entered.
・
Alphabetic (52 letters/upper and lower case)
・
Period
・
Numeric
・
Plus
・
Space
・
Minus
FREQUENCY
947. 000MHz
FREQUENCY
947. 000MHz
FREQUENCY
948. 000MHz
FREQUENCY
948. 000MHz
FREQUENCY
948. 125MHz
NAME
NAME
v
NAME
v o c a l
NAME
v o c a l
■
Transmission frequency setting
■
NAME setting
