background image

AUDIO TECHNICA MODEL ATW-600 
UHF WIRELESS MICROPHONE SYSTEM 
 
USER INFORMATION.

 

 
 

INTRODUCTION

 

 
Thank you for purchasing the ATW-600 series wireless microphone system. It is our hope that the 
system will bring you years of trouble free pleasure and performance. Please follow the information 
contained in this manual closely as it will assist you in using your equipment effectively. 
 
 

 

PART1. REGULATORY REQUIREMENTS.

 

 
FCC PART 15 COMPLIANCE STATEMENT 
 
CANADA RSS-210 COMPLIANCE STATEMENT 
 
 
“This device complies  with Part 15 of the FCC rules. Operation is subject to the condition that this 
device does not cause harmful interference” 
 
“This device complies with INDUSTRY CANADA R.S.S. 210, en confomite avec IC: RSS-210/CNR210. 
Operation is subject to the following conditions: (1) This device may not cause harmful interference and  
(2)   This device must accept any interference received, including interference which may cause 

undesired operation.” 

 
Please note that your ATW-600 system operates in a frequency band in a way,  which may make its use 
subject to certain FCC and other regulatory agency restrictions and licensing requirements. For further 
information, Please contact your local office of the FCC as applicable. 
 
 
 

PART 2. USING THE ATW-T601 BELT PACK TRANSMITTER 

 
The belt pack transmitter operates on one 9V batteries. Please make sure that your batteries are fresh. 
We recommend that you use Alkaline batteries and that you avoid using NiCad if possible. 
 
Remove the battery cover, insert the battery into the battery compartment . 
 
Locate channels selector switch inside of the battery cover, set the channels to the corresponding 
channel as set on receiver.  
 
Connect your microphone or guitar cable to the connector on the topside of the transmitter.  
 
Turn the transmitter switch to the on position. Confirm that the receiver is receiving RF and the audio is 
passing through the receiver.  
 
You are now set to use the system. 
 

PART 3. USING THE ATW-T602 HANDHELD TRANSMITTER 

 
The handheld transmitter operates on one 9V battery. Ple ase make sure that your batteries are fresh. 

Reviews: