How to Connect
How to Charge
English
Computer
USB port
USB charging cable (included)
Micro USB
terminal
Battery
jack
Type A
1
Connect the included USB cable (the micro USB
terminal side) to the headphone battery jack.
Lit red:
Charging
Lit blue:
Charging complete
2
Connect the USB cable (the Type A side) to the computer and start charging.
3
During charging, the indicator turns on/flashes as follows:
Fully charge the battery when using for the first time.
When the rechargeable battery power runs low, you will hear a short beep and the indicator will
flash red. When you hear the beep, charge the battery.
It takes about 3 hours to charge the battery fully. (It varies depending on service conditions.)
* The headphones cannot be used during charging because
Bluetooth
is disconnected.
To connect the headphones to a
Bluetooth
device, the headphones need to pair (register) with the
device. Once they are paired, you don't need to pair them again.
However, you will need to pair again in the following cases:
・
If the headphones are deleted from the
Bluetooth
device connection history,
・
If the headphones are sent out for repair,
・
If the headphones are paired with 9 devices or more.
(The headphones can be paired with up to 8 devices. When you pair with a new device after pairing
with 8 devices, pairing information for the device with the oldest connection date will be overwritten
by information for the new device.)
About Pairing
* The included USB cable is specifically designed to charge the headphones.
Data cannot be transferred to and from computer.
7
