10
Using the product
Talking on the phone
• If your Bluetooth device supports telephone features, you can use this product to talk on the phone.
• When your Bluetooth device receives a phone call, the product's ringtone sounds.
• If a call is received while you are listening to music, music playback is paused. When you finish the call, music
playback resumes.
*1
When
Operation
Function
Receiving
a call
Press the jog switch.
Answers the call.
Press and hold the jog switch
(for about 2 seconds).
Rejects the call.
Talking on
the phone
Press the jog switch.
Ends the call.
Press and hold the jog switch
(for about 2 seconds).
Each time you press and hold the jog switch (about 2
seconds), you switch the call to your mobile phone or to
the product.
*2
Slide the jog switch or −.
Adjusts the volume (+ or -) of the call.
*1 Depending on your Bluetooth device, music playback may not resume.
*2 When you hear the confirmation tone, release your finger from the jog switch.
• The phone call operations above may not be available on some smartphones.
• When talking on the phone, turn off the hear-through mode.
Using the hear-through mode
The product's hear-through mode is a mode that allows you to hear the sounds around you through the built-in
microphone while you are wearing the product.
• Depending on the volume of the music or audio that you are playing, it may be difficult to hear the sounds around
you. If this happens, lower the volume of your music or audio.
• Depending on your surroundings, it may be difficult to hear the sounds around you, even when you are using the
product's hear-through mode. Do not use the product in places that are dangerous if you cannot hear the sounds
around you, such as places where there is heavy traffic.
1. Long-tap (press and hold for about 2 seconds) the touch sensor
while the noise-cancelling function is on.
• The hear-through mode then turns on and the touch sensor
indicator lamp flashes in green.
• When the hear-through mode is on, the volume is
automatically lowered to assimilate to the sounds around you.
2. Once again, long-tap (press and hold for about 2 seconds) the
touch sensor to turn the hear-through mode off.
• The touch sensor indicator lamp flashes in green, and then
stays lit.
Long-tap (press and hold
for about 2 seconds)
Touch sensor indicator lamp
