User Manual
Thank you for purchasing this product.
Before using the product, read through the user manual to ensure that you will use the
product correctly.
Please keep this manual for future reference.
■
Safety precautions
Although this product was designed to be used safely, failing to use it correctly may result
in an accident. To ensure safety, observe all warnings and cautions while using the product.
■
Using headphones
Included detachable cable is connected to the
product at the time of purchase. Do not use a
cable other than the included detachable cable or
dedicated detachable cable sold separately.
1.
Lower the volume on the device you intend to
use, then connect to the device's headphone
jack.
2.
Make sure to place each eartip (LEFT/RIGHT)
in the correct ear.
3.
Turn on your audio device, and adjust volume
as necessary.
*Also read instruction manual of your audio device.
■
About the detachable cable
B C
The cable on the product is detachable. If there
are signs of deterioration, replace the cable (sold
separately).
* Do not detach the cable except when
replacing it with other cable.
■
How to replace the detachable cable
The detachable connector is very delicate. Only
pull or attach in a straight motion to prevent
malfunction.
⁃
How to detach the cable
Hold the connector and pull straight out in the
direction shown by the arrow.
⁃
How to attach the cable
Plug the left (L) connector or right (R)
connector of the cable in as shown in the
figure until it clicks.
■
About the eartips
D
■
Sizes
The product comes with silicone eartips in four
sizes (XS, S, M and L). At the time of purchase, the
M size silicone eartips are attached and positioned
in standard position. To ensure that you will enjoy
the best sound quality, it may be necessary to
change the size and /or position to what is best
suited for you, and adjust the eartips inside your
ears for a snug fit. It may be hard for you to
hear bass sound if the eartips are not positioned
properly.
■
Cleaning the eartips
Remove eartips from the product and clean them
with a diluted detergent. After cleaning, dry
before use.
■
Replacing the eartips
Remove each old eartip, and hold the new eartip
slantwise against the stem as shown in the figure.
Mount the new eartip over the stem up to the
base of the stem.
*The eartips are designed to fit tightly to the product
so that they will not come loose unintentionally.
■
Name of each parts
A B
Confirm each part before using the product.
1 Housing
2 Eartip
3 LEFT/RIGHT (L/R) indicator
4 Bushing
5 1.2 m (3.9') detachable cable
6 Input plug (3.5 mm (1/8”) gold-plated
stereo mini-plug / L-shaped)
7 Cable slider
8 A2DC connector jack
9 A2DC connector plug
■
Notes on use
⁃
To ensure compatibility and correct usage,
always consult the user manual of any device
before connecting the product to it.
⁃
Audio-Technica will not be liable in any way for
any loss of data in the unlikely event that such
losses should occur while using the product.
⁃
On public transport systems or in other public
places, keep the volume low so as not to
disturb other people.
⁃
Minimize the volume on your audio device
before connecting the product in order to avoid
hearing damage from sudden exposure to
excessive volume.
⁃
When using the product in a dry environment,
you may feel a tingling sensation in your ears.
This is caused by static electricity accumulated
on your body, not by product malfunction.
⁃
Do not subject the product to strong impact.
⁃
Do not store the product under direct sunlight,
near heating devices or in a hot, humid or dusty
place. Do not allow the product to get wet.
⁃
When the product is used for a long time, the
product may become discolored due to ultraviolet
light (especially direct sunlight) or wear.
⁃
The cable may become caught or severed if
the product is placed in a bag or pocket without
adequate protection. Always store the product
in the included pouch.
⁃
Connect/disconnect the cable by holding the
plug. Pulling directly on the cable can result in
a broken wire and the risk of electric shock.
⁃
Do not wind the cable around your portable audio
device. This may damage or sever the cable.
⁃
Do not use a cable other than the supplied
detachable cable.
⁃
Be sure to purchase the appropriate
conversion plug adaptor when connecting
the product to equipment with other than a
3.5 mm (1/8”) stereo headphone jack.
⁃
Lengthening the headphone cable requires a
separate extension cable available from your
dealer.
■
Care
Get into the habit of regularly cleaning the product
to ensure that it will last for a long time. Do not
use alcohol, paint thinners or other solvents for
cleaning purposes.
⁃
Use a dry cloth to clean the headphones.
Especially, the eartip contact area can easily
be soiled with earwax through the eartips.
Since dirt may cause the eartips to come off
easily, be sure to clean them regularly. Also,
do not allow the cloth to touch the area from
the sound producing area because it is more
susceptible to damage.
⁃
Use a dry cloth to clean the cable of any sweat
or dirt. Failure to clean the cable may cause it
to deteriorate and harden over time, resulting
in malfunction.
⁃
Wipe the plugs on the cable with a dry cloth
if dirty. Using the plugs without cleaning them
can cause sound interruption or distortion.
⁃
For long-time storage, keep the product
in a well-ventilated place without high
temperatures and humidity.
⁃
Refer to ''Cleaning the eartips'' in ''About the
eartips'' to learn how to clean the eartips.
■
Specifications
ATH-LS70
ATH-LS50
Type
Dynamic
Dynamic
Driver
8.8 mm
8.8 mm
Sensitivity
104 dB/mW
103 dB/mW
Frequency response
5 to 26,000 Hz
5 to 25,000 Hz
Maximum input power
200 mW
200 mW
Impedance
11.5 ohms
11.5 ohms
Input jack
A2DC connector jack
Weight (without cable)
Approx. 6.5 g (0.23 oz)
Included accessories
Detachable cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug / L-shaped),
Pouch, Eartips (XS, S, M, L)
Eartips (Sold separately)
ER-CKM55XS,S,M,L
Cable (Sold separately)
Detachable exclusive cable for LS70/50
For product improvement, this product is subject to modification without notice.
4
2
1
7
5
6
C
A
B
D
3
8
9
Audio-Technica Corp.
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2016 Audio-Technica Corp.
* The illustration is ATH-LS70.
The left
bushing has
a protruding
part.
Cable
Pin
Detachable
cable
How to position
Formable part
* Hold the connector and push or pull in a straight motion as shown
by the arrow.
The cable should fall around the back of your neck.
* To reduce unwanted contact noise from the cable, adjust the cable
slider to hit the base of the neck as shown in the illustration.
Bushing
Cable slider
Adjust by sliding
Headphone
Digital audio player
or other device
Acoustic tube
Sound producing
area
⁃
Follow applicable laws regarding mobile
phone and headphone use if using the
product while driving.
⁃
Do not use the product in places where the
inability to hear ambient sound presents a
serious risk (such as at railroad crossings,
train stations, and construction sites).
⁃
The product effectively shields external
sound, so you may not hear sound around
you clearly while wearing the product. Adjust
the volume to a level where you can still
hear background sound and monitor the area
around you while listening to music.
⁃
Store the eartips out of the reach of small
children.
⁃
If you begin to feel unwell while using the
product, discontinue use immediately.
⁃
To prevent damage to your hearing, do not
raise the volume too high. Listening to loud
sound for an extended period may cause
temporary or permanent hearing loss.
⁃
Discontinue use if skin irritation results from
direct contact with the product.
⁃
Do not disassemble, modify or attempt to
repair the product.
⁃
When removing the product from your ears,
check to make sure the eartips are still attached
to the main unit. If the eartips become lodged
in your ears and you are unable to remove
them, consult a physician at once.
IN-EAR HEADPHONES ATH-LS70
IN-EAR HEADPHONES ATH-LS50
