11
Playing a record
Pausing the record
1. After lowering the volume of the amplifier, speakers, etc.
sufficiently, lift the tonearm with the tonearm lift control lever.
Stopping the record
1. Lower the volume of the amplifier, speakers, etc. sufficiently.
2. Lift the tonearm lift control lever.
3. Return the tonearm to the tonearm rest and fix it with the clamp.
4. Turn the control knob to the "STOP" position.
• The platter slows down and rotation stops.
5. Remove the record after the platter has come to a complete stop.
• To prevent the record from becoming scratched or warped, remove it
after use.
• Do not use a platter other than the one provided.
• The product is not intended for DJs. Do not touch the record or the
rubber mat while the record is playing.
Care
Turntable body
• When the turntable body is dirty or dusty, first disconnect the AC
adapter from the outlet and then wipe off the dirt and dust with a
soft, dry cloth.
• If the rubber mat gets dirty, it can easily scratch the record, so
remove the rubber mat periodically and wipe off any dust.
• Do not use benzenes, thinners, etc.
• When storing the product for a long time, disconnect the AC adapter
from the outlet and wrap the equipment in plastic; do not allow it to
become damp.
Stylus tip
• If dirt and grime are stuck to the stylus tip, clean it before each use.
• We recommend using a stylus cleaner (sold separately) if the stylus
tip is considerably dirty. Clean the stylus tip by moving the brush
from the rear to the front of the stylus tip.
