11
Adjusting the overhang
The position of the cartridge must be accurately determined (adjusting the
overhang) when mounting a cartridge or headshell other than the one provided.
1. Mount the cartridge so it is parallel to the headshell.
• Match up the positions of the cartridge and headshell to the figure
below and mount the cartridge so it is parallel to the headshell.
Overhang adjustment guide
This illustration represents the actual size.
Place the headshell on the figure below, and then adjust the stylus tip
of the new cartridge along the lines for the "Stylus tip" of the cartridge.
2. Mount the cartridge so it is perpendicular to the top of the
headshell.
When the turntable is moved
Using the product's original packing materials, wrap the turntable in
the reverse order from when you unwrapped it. If you do not have the
packaging materials, take the following measures:
• After disconnecting the power cable plug from the outlet, remove the
turntable mat and platter, and then wrap them so that they do not get
damaged.
• Fix the tonearm with the clamp.
• Remove the counterweight.
• Remove the headshell from the tonearm with the protector attached
to the cartridge, and then wrap the entire headshell assembly so that
it does not get damaged.
• Wrap the turntable body with paper or a soft cloth so that it does not
get damaged.
Underside of headshell
Stylus tip
50 mm
Front of headshell
