3. +12 V Power connection
Connect the +12 V contact (yellow) of the High-Low adapter via a fuse (1 A) directly to +12 V. This fuse protects
the amplifier and the vehicle against the possibility of a short circuit in the power cable.
4. Remote connection
0.5 - 1.5 mm power cable. The amplifier turns on as soon as music signal is generated at the input of the High-
Low Adapter.
5. Input
Connect the REM-terminal (blue) of the
HLC 2 em
to the remote-input of the amplifier. Therefore use a
The
HLC 2 e
m has High-Inputs, which have to be connected to speaker output of the head unit (OEM) or
amplifier (OEM).
6. Output
First disconnect the power supply of the vehicle. This works out the best by removing the ground cable of the
battery.
2. Ground connection
ATTENTION:
Connect the GND/ground (black) connection of the
HLC 2 em
with the car chassis. Use a suitable cross
2
section (0.75 - 2.5 mm ). Make sure, that the connection with the vehicle chassis is free of paint, dirt and dust.
1. Battery disconnection
The RCA(Cinch)-outputs of the
HLC 2 em
have to be connected to the RCA(Cinch)-inputs of the amplifier.
Important
in this respect is, that first the
gain-control
of the connected amplifier is
put to minimum
. Turn up
only if necessary.
In this regard,
AUDIO SYSTEM germany
recommends to adjust your amplifier through a
specialized service center, dealer or a specialist.
3
power connections
z
accessoires
BATTERY
AMPLIFIER
AMPLIFIER
GROUND
HEAD UNIT (OEM)
FUSE (1
A)
Max.
30 cm
+12V
REM
GND
L+
L-
R+
R-
White
White/black
Grey
GRey/black
