Step 5
:
Adjust the angle by loosening the two adjustable handles on the side to allow
the TV to tilt forward to 15 degrees or back to 5 degrees (Figure 6).
Once the desired tilt angle is achieved, tighten the handle to secure the television in the
new position. Take caution with wire clips to avoid damaging wires during angle
adjustment.
+5°
-15°
Figure 6
Product dimensions:
PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TWO TV MOUNTS
TO THE BACK PANEL OF TV IN STEP 3. MAKE SURE THE APPROPRIATE
MOUNT HARDWARE IS BEING USED PROPERLY.
1. Select correct Mounting Hardware according to the screw hole size of your TV,
discard any remaining screws or spacers.
2. Carefully lay your TV on its face on a non-abrasivesurface, making sure to lay
padding underneath it so as not to damage the screen.
3. Place left TV mount and right mount in the approriate position, making sure
CENTERED on the back of the TV and LEVEL with on another.
4.This product only install on the perpendicular wall,not install on the ceiling.
MAX:600mm
MIN:200mm
685mm
222mm
MAX:400mm
MIN:100mm
430mm
69mm
+5°
-15°
