6
INStAllAtION
SteP 3
In the hardware bag provided, locate the 4 pan head bolts that fit the thread pattern for your television.
Depending on the spacing of holes on the back of your television, choose from the various mounting
options listed below to attach the mounting bracket to your television. If necessary, use the M6 x 10 bolts
(A) to connect the included extension arms vertically, horizontally or diagonally to reach the television
mounting holes. Gently thread the screws into the television holes by hand. DO NOT USE AN ELECTRIC
OR BATTERY DRILL until you are certain you have the right size thread. DO NOT OVER TIGHTEN the screws
(Figure 3).
NOTE: Use the proper bolts and washers that correspond to the mounting holes on the back of the TV.
Take care to tighten by hand first or damage to the mounting holes can occur. Some TVs without a flat
back may require the use of a spacer when attaching the brackets. If applicable, make sure the two TV
brackets are even and that they’re using the same mounting holes on the bracket. Uneven assembly will
cause the TV screen to slant.
Figure 3 - Attach Bracket to tV
