9
SteP 6
In the hardware bag provided, locate the 4 pan head bolts that fit the thread pattern for your television or
Audio Mount™. With the two Vertical Brackets centered on the back of the TV or Audio Mount™, gently
thread the screws into the holes by hand. DO NOT USE AN ELECTRIC OR BATTERY DRILL until you are
certain you have the right size thread. DO NOT OVER TIGHTEN the screws (Figure 6). When installing an
Audio Solutions™ Audio Mount™ 2.1 or 3.1, mount the television to the Audio Mount™ as instructed in the
Audio Mount™ Owner’s Manual and then mount the brackets to the back of the mount, as illustrated in
Figure 6.
Figure 6 - attach Brackets to tV or audio Mount™
NOTE: If attaching directly to a TV, make sure to use the proper bolts and washers that correspond to the
mounting holes on the back of the TV. Tighten by hand first or damage to the mounting holes can occur.
Some TVs without a flat back may require the use of a spacer when attaching the brackets. If applicable,
make sure the two TV brackets are even and that they’re using the same mounting holes on the bracket.
Uneven assembly will cause the TV screen to slant.
InStaLLatIOn
