Specifications
FREQUENCY RESPONSE:
Line: +0 -1dB 0.6Hz to 80kHz at rated output. -3dB points
below 0.3Hz and above 120KHz.
Phono: ±0.3dB of RIAA 10Hz to 20KHz.
DISTORTION:
Less than .005% at 2V RMS Single Ended output.
GAIN:
Main output line:11.1.5dB Single Ended. Processor: 0dB.
Phono: 58dB at 1KHz.
Record ouput, line: 0dB. Phono: 47dB.
INPUT IMPEDANCE:
60K ohms line, 47K ohms Phono,(0.7 to
7mV High output cartridge recommended). Inputs (6): phono, CD,
tuner, video, aux, processor, (Single Ended RCA connectors).
Model SP17L has no phono input.
OUTPUT IMPEDANCE:
210 ohms Single Ended main; 20K ohms
minimum load and 1000 pF maximum capacitance. Outputs (3):
2 main, 1 record (Single Ended RCA connectors). Record output
60K ohms minimum load and 100pf maximum capacitance.
OUTPUT POLARITY:
Non inverting (Any input or output).
MAXIMUM INPUT:
Line: 9V RMS Single Ended.
Phono: 40mV RMS 1KHz, 100mV RMS 10KHz.
RATED OUTPUTS:
2V RMS Single Ended into 100K load.
(Maximum output 15V RMS at 1% THD at 1kHz).
PUSH BUTTONS:
Volume up, volume down (102 steps, 20 LED
indicators), Input, Processor, Mute, Power. All functions on IR
remote control.
POWER SUPPLIES:
Electronically regulated low and high voltage
supplies. Automatic 25 sec. warm-up/brown-out mute. Line
regulation better than .01%
.
NOISE:
Line: 12uV RMS IHF weighted at main output with
volume low (104dB below 2V RMS output). Phono: 0.3uV RMS
IHF weighted equivalent input noise, shorted input (76dB below
2mV RMS 1KHz input).
REMOTE 12V out:
12V DC at 100mA max for system power
control.
TUBE COMPLEMENT: (
2)-6H30 dual triodes.
POWER REQUIREMENTS:
100-135VAC 60Hz (200-270VAC
50/60Hz) 39 watts.
DIMENSIONS:
19.0" (48 cm) W x 5.2" (13.2 cm) H x 10.0"
(25.4 cm) D. Rear connectors extend 0.6" (1.5 cm). Front handles
are optional.
WEIGHT:
12.6 lbs. (5.7 kg) Net; 20 lbs. (9.1 kg) Shipping.
Specifications subject to change without notice.
©2007 Audio Research Corporation.
5
Model SP17
