Audio Research reference dac, User Manual

Page: 25 / 36

25
You will have the option to complete the process by connecting the Reference DAC at a later
time if you choose. If so, click finish.
Otherwise, when prompted during the install, connect the Reference DAC to a USB 2.0 H.S.
or USB 3.0 port on your PC system. Prior to connecting the CD player, make certain the
system is powered off. Next, connect to the USB port, and power on the Reference DAC.
The PC system will acknowledge the presence of the CD player, and complete installation
of the DAC USB device driver. This driver attachment can be found in the Windows Control
Panel under:/Hardware and Sound/Devices and Printers.
The device should be shown as “USB DAC 2.0”, or, depending upon the operating system,
it may appear as “USB DAC 2.0 192”. (Please note that you will only see this device in the
control panel if the source player is attached to the USB port and power is on for the
Reference DAC).
Software Installation