9
Cleaning
To maintain the new appearance of this
amplifier, occasionally wipe the front
panel and top cover with a soft, damp
(not wet) cloth to remove dust. A mild,
non-alkaline soap solution may be used to
remove fingerprints or similar smudges.
Cleaners containing abrasives should not
be used as they will damage the anodized
finish of the front panel. A small, soft
paintbrush is effective in removing dust
from bevels, the recessed nameplate and
other features of the front panel.
Disposal and Recycling
Guidelines
To dispose of this electronic product, do
not place in landfill. In accordance with
the European Union Waste Electrical and
Electronic Equipment (WEEE) directive
effective August 2005, this product may
contain regulated materials which upon
disposal require special reuse and
recycling processing.
Please contact your dealer or importing
distributor for instructions on proper
disposal of this product in your country. Or,
contact Audio Research Corporation
(763.577.9700) for the name of your
importing distributor and how to contact
them. Packing and shipping materials may
be disposed of in a normal manner.
Limited Warranty
Audio Research Corporation products are
covered by a 3-Year Limited Warranty or a
90-Day Limited Warranty (vacuum tubes).
This Limited Warranty initiates from the
date of purchase, and is limited to the
original purchaser, or in the case of
demonstration equipment, limited to the
balance of warranty remaining after
original shipment to the retailer or importer.
In the United States, the specific terms,
conditions and remedies for fulfillment of
this Limited Warranty are listed on the
warranty card accompanying the product
in its shipping carton, or may be obtained
from the authorized retailer or from the
Audio
Research Customer Service Department.
Outside the United States, the authorized
importing retailer or distributor has
accepted the responsibility for warranty of
Audio Research products sold by them.
The specific terms and remedies for
fulfillment of the Limited Warranty may
vary from country to country. Warranty
service should normally be obtained from
the importing retailer or distributor from
whom the product was purchased.
In the unlikely event that technical service
beyond the ability of the importer is
required, Audio Research will fulfill the
terms and conditions of the Limited
Warranty. Such product must be returned
at the purchaser's expense to the Audio
Research factory, along with a photocopy
of the dated purchase receipt for the
product, a written description of the
problem(s)
encountered,
and
any
information necessary for return shipment.
The cost of return shipment is the
responsibility of the purchaser.
