11
Operation
Remote Only Functions
The remote control unit includes all of the
above described CD9SE front panel control
functions plus the following additional
functions. (Functions in [ ] indicate
labeling abbreviations appearing on remote
control unit.)
0-9 Buttons:
Pressing numbered button(s)
corresponding to the disc track number will
advance disc to desired track. Also used to
select tracks when compiling a custom disc
playback program (see PROGRAM function
description below).
Shuffle [SHUF]:
Toggles between Shuffle
play (random playback order) and normal
play (sequential playback). SHUFFLE
appears in the display window when
random playback is selected.
Filter:
Select between Fast and Slow digital
filters. Pressing FILTER will toggle between
the two options, and will be indicated by an
LED next to the selected filter name.
Display Down/Display Up: [DSPDN/
DSPUP]:
Decreases/Increases display
intensity, offering four levels of brightness
as well as display off.
Scan:
With a stopped CD and the CD door
closed, press SCAN and the first 10 seconds
of each track will be played in sequence.
(“SCAN” will light up on display, then 10
seconds are counted out next to each track
number.) To hear a track in full that the
player is presently scanning, press SCAN
button again which will cancel SCAN
function.
A/B:
Press the A/B button once while
music is playing, then press it again; the
musical passage in the interval between
pressing the button is then repeated in a
loop until pressing the A/B button once
again to discontinue it. Display reads
“A—B” to show activation. Note: you must
discontinue the A/B loop before pressing
PLAY to resume normal playback. Pressing
and holding this button down will fast
search backward through the track that is
playing until it is released. Rate of search
accelerates as button is held down.
Upsample:
Select between native sampling
rate playback and integer upsampling. 44.1
kHz and 88.2 kHz sampling frequencies
are upsampled to 176.4 kHz, whereas 48
kHz and 96 kHz frequencies are upsampled
to 192 kHz. An LED will indicate which
sampling frequency is selected. Note:
When using the USB input, upsampling is
available only to 88.2 kHz or 96 kHz.
Input:
Select between CD playback and the
digital inputs on the rear panel (Toslink,
USB, RCA, AES/EBU). Pressing INPUT
toggles through the different inputs, and
the selected input will be indicated by an
LED next to the input name. Note: display
window is illuminated only during CD
playback.
Repeat [REP]:
Press REPEAT once to repeat
the entire disc continuously (“REPEAT”
appears in display window). Press REPEAT
once more to continuously repeat the track
now playing (“REPEAT 1” appears in display
window). Press REPEAT once again to
discontinue repeat mode.
CD9.indd 12
1/21/16 1:55 PM
