11
Remote Only Functions, continued
Input:
Select between CD playback and the
digital inputs on the rear panel (2 Toslink,
USB, RCA). Pressing INPUT toggles through
the different inputs, and the selected input
will be indicated by an LED next to the input
name. Note: display window is illuminated
only during CD playback.
Time:
Pressing and releasing TIME repeatedly
will cycle through the following information
on the display: current track time elapsed
(default setting initially seen on display),
total disc time elapsed, and total disc time
remaining.
Display Down/Display Up [DISP DN/DISP
UP]:
Decreases/Increases display intensity,
offering four levels of brightness as well as
display off.
A/B:
Press the A/B button once while music
is playing, then press it again; the musical
passage in the interval between pressing the
button is then repeated in a loop until pressing
the A/B button once again to discontinue
it. Display reads “A—B” to show activation.
Note: you must discontinue the A/B loop
before pressing PLAY to resume normal
playback. Pressing and holding this button
down will fast search backward through the
track that is playing until it is released. Rate
of search accelerates as button is held down.
Program [PROG]:
Allows compiling a custom
track selection and playback order of up to
20 tracks on a disc. With the player in STOP
mode, enter the desired first track number and
then press the PROGRAM button. The word
“PROGRAM” will light and the display will
show the total number of tracks programmed
and total programmed time. If a second track
selection is entered, the word “PROGRAM”
flashes, indicating that other track(s) have
already been stored in the program memory.
Press the PROGRAM button to save the
second track selection. Repeat procedure to
program additional tracks as desired. This
programming procedure, with readout of the
cumulative total number of programmed
tracks and total programming time (including
time between tracks), works for any of the
first 13 numbered tracks on a disc. You may
program track numbers higher than 13, but
from then on no track time information will
appear on the display. To preview a program
before playing it, press PLAY and then use
the NEXT and PREV buttons to cycle through
track selections. Pressing PLAY will begin
playing program. Pressing STOP once will
stop program play. Pressing PLAY again will
resume play from beginning of program. To
cancel program, press STOP twice.
Operation
CD6 Manual.indd 12
1/6/17 5:18 PM
Input:
Select between CD playback and the
digital inputs on the rear panel (RCA, USB,
AES/EBU, Toslink). Pressing INPUT toggles
through the different inputs, and the selected
input will be indicated by an LED next to
the input name. Note: display window is
illuminated only during CD playback.
