Audio Pro WR200 Owner'S Manual Download Page 10

impOrtant saFety instruCtiOns

1. read these instructions.

2. keep these instructions.

3. heed all warnings.

4. Follow all instructions.

5. do not use this apparatus near water.

6. Clean only with dry cloth.

7. do not block any ventilation openings. install in accord-

ance with the manufacturer’s instructions.

8. do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including ampli-

fiers) that produce heat.

9. protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the 

manufacturer.

11. unplug this apparatus during lightning storms or when 

unused for long periods of time.

12. refer all servicing to qualified service personnel. 

servicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug is 

damaged, liquid has been spilled or objects have fallen 

into the apparatus, the apparatus has been exposed to 

rain or moisture, does not operate normally, or has been 

dropped.

13. damage requiring service

unplug the apparatus from the wall outlet and refer servic-

ing to qualified service personnel under thee following 

conditions:

a. when the power-supply cord or plug is damaged,

B. if liquid has been spilled, or objects have fallen into the  

apparatus,

C. if the apparatus has been exposed to rain or water,

d. if the apparatus does not operate normally by following 

the operating instructions. adjust only those controls that 

are covered by the operating instructions as an improper 

adjustment of other controls may result in damage and will 

often require extensive work by a qualified technician to 

restore the apparatus to its normal operation,

e. if the apparatus has been dropped or damaged in any 

way, and

F. when the apparatus exhibits a distinct change in per-

formance this indicates a need for service.

14. Object and liquid entry

never push objects of any kind into the apparatus through 

openings as they may touch dangerous voltage points or 

short-out parts that could result in a fire or electric shock. 

the apparatus shall not be exposed to dripping or splash-

ing and no objects filled with liquids, such as vases shall 

be placed on the apparatus. don’t put candles or other 

burning objects on top of this unit.

15. Batteries

always consider the environmental issues and follow local 

regulations when disposing of batteries.

16. if you install the apparatus in a built-in installation, 

such as a bookcase or rack, ensure that there is adequate 

ventilation. leave 20 cm (8”) of free space at the top and 

sides and 10 cm (4”) at the rear. the rear edge of the 

shelf or board above the apparatus shall be set 10 cm (4”) 

away from the rear panel or wall, creating a flue-like gap 

for warm air to escape.

17. the power supply and power cord for this apparatus is 

intended for indoor use only.

18. Only use the enclosed aC adaptor.

WArninG:

tO reduCe the risk OF Fire Or eleCtriC 

shOCk, dO nOt eXpOse this apparatus 

tO rain Or mOisture.

CAUtiOn:

tO reduCe the risk OF eleCtriC shOCk,  

dO nOt remOve COver (Or BaCk). 

nO user-serviCeaBle parts inside.  

reFer serviCing tO QualiFied 

serviCe persOnnel.

the lightning flash with arrowhead symbol, within an 

equilateral triangle, is intended to alert the user to the 

presence of uninsulated “dangerous voltage” within the 

product’s enclosure that may be of sufficient magnitude 

to constitute a risk of electric shock to persons.

the exclamation point within an equilateral triangle is 

intended to alert the user to the presence of important 

operating and maintenance (servicing) instructions in 

the literature accompanying the appliance.

Summary of Contents for WR200











Reviews: