APB-P112SB - Front panel (Input section)
APB-P112SB - Rear panel
1) Input XLR LINE connector
Input your LINE-level source into this
XLR balanced connector.
4) Output level indicator bar
You can visually monitor the level of
output signal in 7-segment output
indicator bar with signal clip LED. If
this red light is flashing, you should
reduce the gain of the microphone.
5) Gain Reduction indicator bar
If Comp switch is set to ON, you can
visually monitor the level of Gain redu-
ction on this 4-segment indicator bar.
6) Power ON indicator
When AudioPressBox® is turned on,
this indicator lights up.
7) Power switch
With the power switch, you can turn
your AudioPressBox® ON or OFF.
2) Input gain level knob
Input your LINE-level source into this
XLR balanced connector.
3) Compressor/Limiter operation
switch
To provide perfect output signal
without clipping or distortion, you can
switch the Comp button ON. If you
switch this OFF, signal in output could
contain signal clipping or distortion.
5
APB-116SB
Charge
Output
Level
Gain
Reduction
1
6
7
2
3
4
5
+12
+6
0
-6
-12
-24
-48
Clip
-10 +20
0
100%
50%
25%
Low
Battery
Power
3
6
12
18
On
Off
On
Off
Input
Gain
Comp.
Power
DC 12-24V
1000mA
8