Mounting Option III: Optional slide adapters for APx515
(Figure 3)
Step 1. Order compatible rack slides from a third party manufacturer. Audio Precision does not sell rack slides for this product. We
recommend General Devices slide part number C-300-S-1xx, and the C-300 optional mounting brackets ([email protected],
or 317-897-7000). The “xx” in the part number listed here represents the length of the slide, which will vary depending upon your rack
depth and application. Please consult with a General Devices sales engineer to determine the correct length.
Caution:
It is essential that the rack slides be supported at both the front and the rear of the rack. Mounting the rack slide to the front
of the rack only will result in mechanical failure. You must order and install the correct rear mounting brackets (K) for your rack and
application. Please consult with a General Devices sales engineer to determine the correct rear mounting brackets.
Step 2. Perform Steps 1–4 for Mounting Option II, on the previous page.
Step 3. Mount the two “chassis sections” (F) of the C-300-S slide to the sides of the rack mounting shelf, using hardward (G) provided
with the slide. Follow the slide manufacturer’s instructions and guidelines.
Step 4. Mount the two “stationary sections” (H) of the C-300-S slide in the 19" rack. Follow the slide manufacturer’s instructions and
guidelines. Be sure to attach these parts to both the front and the rear of the rack, using rear mounting brackets (K).
Step 5. Slide the assembled shelf, APx515 instrument and slide chassis sections into the slide stationary sections. Follow the slide
manufacturer’s instructions and guidelines.
Figure 3. Attaching rack slide sections to rackmount shelf.
F
F
G
K
H
5750 SW Arctic Drive
Beaverton OR 97005
1-800-231-7350
www.ap.com
X09221006 8211.0284 r0
