2
POWER SUPPLY
Ensure that the insource voltage (AC outlet) matches the voltage rating of the product. Failure to do so could result in
damage to the product and possibly the user. Unplug the product before electrical storms occur and when unused for
long periods of time to reduce the risk of electric shock or fire.
EXTERNAL CONNECTION
Always use proper ready-made insulated mains cabling (power cord). Failure to do so could result in shock/death or fire.
If in doubt, seek advice from a registered electrician.
FUSE
To prevent fire and damage to the product, use only the recommended fuse type as indicated in this manual. Do not
short-circuit the fuse holder. Before replacing the fuse, make sure that the product is OFF and disconnected from the AC
outlet.
PROTECTIVE GROUND
Before turning the unit on, make sure that it is connected to Ground. This is to prevent the risk of electric shock.
Never cut internal or external Ground wires. Like wise, never remove Ground wiring from the Protective Ground
Terminal.
OPERATING SAFETY INSTRUCTIONS
Read these instructions. Follow all instructions. Keep these instructions. Do not discard. Heed all warnings. Only use
attachments/accessories specified by the manufacturer.
This symbol indicates that the disposal of this product is submitted to local regulations. Please contact
your local dealer.
DISPOSAL
Important Safety Instructions
This symbol, wherever used, alerts you to the presence of un-insulated and dangerous voltages within
the product enclosure. These are voltages that may be sufficient to constitute the risk of electric shock or
death.
This symbol, wherever used, alerts you to important operating and maintenance instructions.
DO NOT REMOVE ANY COVERS
Within the product are areas where high voltages may present. To reduce the risk of electric shock do not remove any
covers unless the AC mains power cord is removed. Covers should be removed by qualified service personnel only. No
user serviceable parts inside.
POWER CORD AND PLUG
Do not tamper with the power cord or plug. These are designed for your safety. Do not remove Ground connections! If
the plug does not fit your AC outlet seek advice from a qualified electrician. Protect the power cord and plug from any
physical stress to avoid risk of electric shock. Do not place heavy objects on the power cord. This could cause electric
shock or fire.
SERVICING
Refer all servicing to qualified service personnel only. Do not perform any servicing then those instructions contained
within this User’s Manual.