1.
Be sure to note the following polarities when multiple speakers are
used in the same location. Incorrect connections could result in no
bass output or decreased volume.
2.
Connect the correct (+) and (COM) polarity terminal as per mark on
the block.
Connections
3
4
Handling Precautions
Dimensions
4
Impedance Selection
The speaker comes with a factory wiring connected to the value 20 W
(100 V) of the transformer.
A lower value of the power can be set using the other available
terminals. Connection points are shown on the plate of the transformer
(Attention, 70 V and 100 V connections are not identical).
When several speakers are used, they must be connected in parallel
and their cumulative power must be less than the nominal power of the
amplifier.
