Installations Hints
4
In case of installation in cabinet or rack, ensure the ventilation requirements. The depth of the unit is 330 mm.
The dimensions in height is 2 units Rack (88 mm).
Do not position audio high-gain equipment like preamplifiers or recorders just above or below the amplifier.
Despite the protections of the radiation device, magnetic fields can induce hum in unscreened ancillary
equipment.
Do not obstruct the entrance and exits of air for the cooling of the device. Any impediment to the free
movement of air in the amplifier may cause a failure not covered by the warranty.
The device use in an environment where the air is confined or polluted requires frequent internal cleaning.
Smoke and dust particles accumulated inside the appliance may cause failures not covered by the warranty.
This cleaning should be done by qualified personnel.
Before any work on the wiring, be sure to turn the volume control knobs fully counterclockwise and turn off the
unit.
Use good quality audio cables,
shielded
, for inputs. A balanced or unbalanced connection is feasible.
7
Example
5
CD, MP3 player
Tuner
Microphones
Amplifier
Message
player
Speaker
EQ
Speakers
DC supply
Mains supply
