background image

 
 
Line inputs 

Being  a  stereo  power  amplifier,  the  VINDICATOR  Silver  Signature  is 
fitted with one pair of single ended / RCA inputs. Looking from behind 
the amplifier, they are located at the right hand side of the rear panel. 
The Black socket (top) is for the Left channel, the Red socket (bottom) 
is for the Right channel. Connect the output from your preamplifier to 
these inputs. 

 

Speakers   

Each  channel  is  equipped  with  3  colour  coded  binding  posts  for 
connection to your speakers, located on the rear panel. 

 

 

 

Looking  from  the  rear  of  the  amplifier,  the  3  binding  posts  at  the  top 
are  for  the  left  channel  and  the  3  binding  posts  at  the  bottom  are  for 
the right channel. 

 

 

 

Connect  the  amplifiers  black  speaker  output  binding  post  marked  as    
“0” to the black / negative terminal (also marked “ – “) on the speaker. 

 

 

 

 

Connect  the  amplifiers  red  speaker  output  binding  post  marked  “8 

Ohm” to the red / positive terminal (also marked “ + “) on the speaker. 
The  other  red  speaker  output  binding  post  is  marked  “4  Ohm”  and 
may be used with 4 Ohm speakers. If you are uncertain whether your 
speaker system is specified as 4 or 8 Ohm, try the following test once 
all  other  connections  are  made  and  the  amplifier  is  operational. 
Compare  the  sound  quality  using  a  familiar  recording  with  the 
speakers  connected  to  the  8  ohm  connections  and  then  the  4  Ohm 
connections  respectively.  The  selection  that  produces  the  best 
frequency balance and maximum dynamics should be used.

 

 
Mains 

 

The  VINDICATOR  Silver  Signature  uses  an  IEC  320  mains  inlet 

socket.  Use  the  supplied  mains  cable  to  connect  the  unit  to  the  local 
mains  supply.  The  mains  fuse  and  a  spare  are  located  in  the  inlet 
socket fuse drawer. 

 

Special Note – Make sure that all connections are tight and clean. For 

best  results  use  good  quality  audio  interconnects.  Although  it  is 
perfectly acceptable to use cables manufactured by other companies, 
for best results and performance, we recommend our own 

Audio Note 

(UK)  range  of  interconnects  and  loudspeaker  cables.  For  further 
information,  please  consult  your  nearest  Audio  Note  (UK)  dealer,  or 
alternatively please feel free to contact us directly. 

 
 
 
 
 
 
 
 
 
 
 
 

CONNECTION 

Summary of Contents for VINDICATOR Silver Signature













Reviews: