Special Note – Make sure that all connections are tight and clean. For
best results use good quality audio interconnects. Although it is
perfectly acceptable to use cables manufactured by other companies,
for best results and performance, we recommend our own
Audio Note
(UK) range of interconnects and loudspeaker cables. For further
information, please consult your nearest Audio Note (UK) dealer, or
alternatively please feel free to contact us directly.
Inputs
The DAC4.1x Balanced Signature is equipped with two digital inputs,
consisting of one single ended RCA socket, and one balanced XLR
socket. Only connect one input, as it is not possible to use both inputs
simultaneously.
Mains
The DAC4.1x Balanced Signature utilizes an IEC 320 mains inlet
socket. Use the supplied mains cable to connect the unit to the local
mains supply. The mains fuse is located in a separate fuse holder,
situated below the mains inlet socket.
Ground Post
A ground post is provided for connection to the ground terminal
located on the following pre amplifier, or the preceding CD Transport.
If, after all connections have been made, you experience any ‘hum’
problems, experiment with linking the ground posts / terminals with a
short length of wire.
Outputs
The DAC4.1x Balanced Signature provides two unbalanced outputs,
consisting of two pairs of colour coded RCA / Single Ended sockets.
RED
is for RIGHT channel connection, WHITE is for LEFT channel
connection.
There is also a balanced output, consisting of a pair of ‘male’ XLR
sockets (see ‘Balanced’ section, below).
RCA
The two pairs of RCA / Single Ended outputs are identical, and are for
connection to a pre amplifier or recording device.
CONNECTION
RCA SOCKET,
CENTRE = POSITIVE / SEND.
RCA SOCKET,
SHELL = NEGATIVE / RETURN.