background image

 

PROGRAMMING 
 

You  may  select  a  number  of  tracks  and  store  them  in  the  memory  in  the  desired 

sequence.   The transport will then play back only your selection of tracks in the selected 
order. 
 
1  

Press the MEMORY button. 'MEMORY' will appear on the display. 

Press the CD SKIP or numbered buttons - To select the desired track to be stored. 

3  

Press the MEMORY button - The track is  now stored in the memory.  

 

Repeat steps 2 and 3 to complete programming. 

4  

Press PLAY to listen to the programmed tracks. 

5  

Press STOP once to stop playback. 

6  

Press STOP second time to clear programming. 

 
 

A maximum of 32 tracks may be stored. 

 

A particular track in your selection may be replaced with a new one if the original 

selection  was  made  in  error.  Simply  store  the  new  track  in  the  program  number  to  be 
replaced. 
 
NOTE: Programming may not be made during playback. 
 
 

TIME  button.  Press  this  button  to  see  the  elapsing  or  remaining  time  of  the  CD  

(Play  mode  only).  Press  the  TIME  button  and  select  the  desired  TIME  DISPLAY  for  CD 
playback. 
 

Each time this button is pressed, selection is as follows: 

 
 

"EACH REMAIN" 

the elapsed playing time for the current track 

 

"TOTAL" 

the total elapsed playing time 

 

"TOTAL REMAIN" 

the remaining playing time for the current track 

 

 

REPEAT button. Press  this button to listen  to the music repeatedly.  Press once to 

repeat the entire disc. Press twice to repeat the track being played. 
 
 

RANDOM button. Press this button for random order (shuffle) playback. 

 
 

NUMBERED buttons. A particular track may be selected for playback by using these 

buttons. Example: 

To play track No. 3, press the button “3” once. 
To play track No. 14, press the buttons “1” and “4”. 
To play track No. 20, press the buttons “2” and “0”. 

 
 

DISPLAY  button.  Press  this  button  to  change  the  intensity  of  display  or  to  turn  it 

on/off. 
 

Press  the  DISPLAY  button  once  to  reduce  the  intensity  of  the  display.  Press  the 

DISPLAY button twice to turn the display off. To turn the display on again, please press 
DISPLAY button once again. 
 
 
 
 
 

Summary of Contents for CDT Six










Reviews: