- -
3
Press the STOP/CLEAR button (No.4) and playback will be stopped this will also cancel the
Random mode.
REMOTE CONTROL
All the above buttons and functions are copied on the remote control handset.
The batteries supplied with the CD player should be fitted into the back of the remote
control before operating the remote control. Please make sure the batteries are inserted
correctly.
The following functions are only available on the remote.
•
REPEAT PLAYBACK
(a) Press the CD skip buttons – to select the desired track.
(b) Press Repeat button – ‘Repeat One’ the track displayed will be repeated.
(c) Press Repeat button twice – ‘Repeat All’ is displayed and the whole of the CD is
repeated.
All tracks are repeated until STOP button is pressed. To cancel any of the Repeat modes
press the Repeat button repeatedly until ‘Repeat’ disappears on the display.
•
MEMORY
You may select a number of tracks and store them in the memory in the desired sequence.
The CD player will then play back your selection of tracks in the desired order.
(a) Press Memory button - ‘Memory’ will appear on the screen.
(b) Press CD skip buttons – To select the desired track to be stored.
(c) Press Memory button – The track is now stored in the memory.
Repeat steps b and c to complete the memory programming.
Press the Play button to playback the programmed tracks and the Stop button to stop
playback. To cancel the programming press the Stop button twice.
A maximum of 32 tracks may be stored and to review the programming press the Memory
button and the program number and its track will appear.
•
SEARCH BUTTONS
Press these buttons to cue or review a track.
(a) Press >> Search button and hold down to fast forward a track.
(b) Press << Search button and hold down to review (rewind) a track.
•
TIME BUTTON
Press this button and select the desired time display for CD playback.
Each time this button is pressed the display changes as follows :
‘EACH’ : Elapsed playing time for the current track.
‘REMAIN’ : Remaining playing time for the current track.
‘TOTAL’ : Total elapsed playing time for the CD.
Press again and the display changes back to the EACH mode.
•
INTRO (SCAN) BUTTON
Intro scan plays the first 10 seconds of each track, in the normal order so a quick listen to
each track can be made.
(a) Press Intro button - ‘INTRO’ appears on the display and the first 10 seconds of each
track will be played.
(b) Press Intro button again at any time and normal playback will be resumed.
