Audio Note CD2.1x Owner'S Information Download Page 4

-  -

 

4

‘TOTAL’   : Total elapsed playing time for the CD. 
Press again and the display changes back to the EACH mode. 
 

• 

INTRO (SCAN) BUTTON 

Intro scan plays the first 10 seconds of each track, in the normal order so a quick listen to 
each track can be made. 
  (a) Press Intro button - ‘INTRO’ appears on the display and the first 10 seconds of each 
track will be played. 
  (b) Press Intro button again at any time and normal playback will be resumed. 
 
If all is in order, the system is now ready to play music, and at last the sound of your 
compact discs will be tolerable! Any CDs that have the De-emphasis process the player will 
automatically correct this process. 
The CD2.1x will improve over time and start to sound really well balanced.  This is because 
of the “bedding in” time taken by new electrical components inside the unit.  Also, the CD 
sound quality improves as the unit reaches its normal, stable operating temperature. The 
CD need not be switched off each time after use. It is interesting to note that continuous 
operation not only results in optimum sonic performance (since the unit is maintaining a 
constant operating temperature) but also causes less electrical stress and so extends 
component and valve life. 
 
Please Note: that all our CD players have been designed to run into impedances of 100K or 
above. Many transistor amplifiers and passive devices are not. We do not recommend less 
than 50K as one of the problems is possible bass roll off. If you are in any doubt consult 
your dealer. A modification can be made at the factory for which a charge is made and is 
refundable should you buy an Audio Note amplifier from us. 
 
CLASS 1 LASER PRODUCT 
 
This product contains a low power laser device. To ensure continued safety, do not remove 
any covers or attempt to gain access to the inside of the product. Refer servicing to qualified 
personnel. 
 
AFTER CARE 
 
No special maintenance is required for the CD2.1x.  Cleaning is best made with a soft cloth 
or brush similar to those sold by photographic stores for lens cleaning applications. 
Use a cloth dampened with mildly warm water and a weak soap solution for removing 
grease or oily substances.  Strong or alcohol based solvents may cause damage to the CD’s 
finish. 
Should the valve require replacement, please contact your Audio Note™ dealer for technical 
support. 
 
 
 
WARRANTY AND SERVICING 
 
Audio Note™ warrants this product free from defects in materials and workmanship for one 
year from original date of purchase from an appointed Audio Note™ dealer.  The vacuum 
tubes are warranted for three months. 

Summary of Contents for CD2.1x






Reviews: