VCP-015-02-x Installation & Operation Manual
Document # 540228, Rev A, 05/2003
Page 7 of 18
2.2
If damage has occurred during shipping, a claim should be filed with Audio
International WITHIN 24 hours and a
Return Request Authorization
Number
shall be obtained from AI. Refer to the front cover of this manual
for address and telephone number of Audio International, Inc. Repackage
the unit in its original packaging materials and return it to AI following
instructions given by the AI representative. If no return is necessary,
retain the packing list and the packing materials for storage.
3.0
Cautions & Warnings
3.1 It is important to do a pin-to-pin power and ground check on all
connectors. Ensure that power and ground are applied only where
specified. Damage to the unit may result if power or ground is applied to
the wrong points.
3.2
DO NOT
connect or disconnect the unit while power is applied.
3.3
DO NOT
remove any factory-installed screws. Damage to the unit may
result and void any warranties.
3.4
DO NOT
attempt to open the case. Refer servicing to qualified personnel.
3.5
DO NOT
place foreign objects into openings. Contact with foreign objects
may result in dangerous voltage or electric chock.
3.6
DO NOT
place unit near hot air ducts, heating elements, or other heat
sources.
3.7
DO NOT
use this unit other than for its intended purpose. Doing so might
lead to electric shock or injury or damage to the equipment.
3.8
DO NOT
use near water, moisture, or volatile sprays. Do not use any type
of solvent when cleaning the unit, surface damage may occur.
3.9
USE
this unit in a horizontal position only.
DO NOT
mount it on its side.
